D P L
ZBF22QS double acting self holding ball valve
characteristic
1. The valve adopts the ball valve structure to enhance the sealing performance and prolong the service life.
2. The coil is instantly charged, to avoid the traditional solenoid valve because of long-term live easy to burn the coil and cannot work.
3. The flow direction of the medium is not required. The solenoid valve ports enter and exit each other.
4. Because of its direct access structure, the cleanliness of the medium is not required.
5. There is no requirement for the inlet and outlet working pressure, and it can work normally within the 0~2.5MPa pressure range.
6. When working, the internal and external circuits are required to change the closing and closing state of the valve, so even if the external switch signal misoperates, as long as the internal circuit is normal, the valve will not operate incorrectly.
7. The valve is made of stainless materials to ensure good operation.
technical parameter
● nominal pressure: 1.6Mpa, and the other pressure levels can be customized, and the maximum pressure is up to 6.4MPa
● working pressure difference: any pressure between 0~2.5MPa is also suitable for vacuum pipe
● working medium: air, oil, and water
● medium temperature: 0~150℃
● media flow direction: both positive and reverse direction are available
● ambient temperature: -20~40℃
● relative humidity: 95%
● power supply: DC 220V, 110V, 48V AC 220V, 110V
